Save on Fuel

The CBC posted their top eight ways to save on fuel as prices continue to climb at the pump.

I don’t agree with all of them.

  • Choosing supreme gas for an automobile that specifies regular won’t improve fuel mileage since octane ratings are for compression. You may see some improvements in fuel economy if you choose a fuel that has no ethanol in it since it’s energy content is lower than gasoline [wikipedia].
  • Sparkplugs last longer than a year. You may not want to go the full 160,000km on the same set and be sure to replace them with high quality plugs at or above OEM specs.

I would move the behaviour items further up the list too. Stops and starts as well as speeding can really increase your fuel consumption.
Continue reading Save on Fuel

Fall Maintenance

The leaves turning, nights getting cooler and mornings crisper is a signal that the seasons are changing. It’s time to start thinking about putting away summer equipment while looking over any winter gear that may need some work before the snow flies. Don’t forget to maintain those daily drivers to help them make it through another winter.

The fall is the perfect time to change the oil on your daily driver if you’re on an extended 6-month/15,000-km schedule using either the Signature Series or the XL Series from the 3 tiers of AMSOIL engine oils. Our 2005 Vibe was changed last weekend and is now good until May of 2013 or 20,000-kms.

I think it’s too soon to put the bikes away but those early morning starts without synthetics in the crank case may become a bit more harsh. Try one of the AMSOIL motorcycle oils to help with extream temperatures like cold starts and hot idling in the heat of the summer. In my opinon fresh oil is the best way to store any piece of equipment/vehicle. AMSOIL motorcycle oils have excellent anti-corrosion additives that lesser oils may be lacking.

How do you remember what needs to be done? Especally if you’re maintaining the equipment for an entire house, family or small fleet?
Continue reading Fall Maintenance

Ready To Go Fishing?

Here in my part of Southern Ontario the sport fishing season is starting to open up soon.

People are already getting their boats on the water for perch and crappie. Trout opens today, walleye and pike open in mid-May and then bass and muskies open later in June of 2012. Check your local fishing regulations and be careful which zone you are fishing in – I can be inland or out on the Great Lakes which changes dates and locations.
Continue reading Ready To Go Fishing?

Fuel Economy and Friction Losses

A great article was published in the July Preferred Customers edition of AMSOIL Magazine titled “Frictional losses account for big part of fuel energy inputs“.

The article shows where most of the energy associated with a unit of fuel is consumed or wasted by a vehicle. The spoiler is that only about 12.6% of the fuel energy is passed through the system to drive the wheels of the vehicle. Think how your fuel economy could improve if you could decrease wasted energy by friction – even small gains in reducing friction will add up at the pump.

Some of the AMSOIL fluids you can install in your vehicle to reduce friction include: Continue reading Fuel Economy and Friction Losses

2009 Mitsubishi Outlander Differental & Transfer Case

I took my 2009 Mitsubishi Outlander to Erin Mills Master Mechanic to get the transfer case and rear diff fluids changed out. Replacing the OEM fluid with AMSOIL Severe Gear® Synthetic Extreme Pressure (EP) Gear Lube 75W-90 (SVG).

I wasn’t confident about my plan to use wheel ramps on the down slope of my driveway to get an almost level vehicle. What I really needed was a lift so I reached out for some help to the local mechanic shops in my area. Master Mechanic Erin Mills was happy to install my own fluids for reasonable labour rates. An average oil and filter change would run abut $20 – call ahead to make sure the bays aren’t filled.

Back to the rear diff. The drain plug has a 10mm hex head which is near the bottom, not sure of the size of the fill plug above it to the right.

It is a really simple drain and fill – make sure you get the fill bolt cracked before you try the drain. Once you get the drain out, open the fill completely and make sure your catch basin is in a good spot for full flow – it’s only ~0.5L so there isn’t as much head pressure as the crankcase oil. You require a level vehicle to fill the diff/transfer case. Pump in the new fluid until it overflows then insert the fill plug and you’re done.
Continue reading 2009 Mitsubishi Outlander Differental & Transfer Case

Transfer Case

I attempted to replace the fluid in my Mitsubishi Outlanders transfer case tonight with AMSOIL Severe Gear® Synthetic Extreme Pressure (EP) Gear Lube 75W-90 (SVG).

Ran into a bit of a problem once I realized the drain bolt was a hex head and I don’t have the correct socket. The 3/8″ hex from my old Chevy Cavaliers brake calipers fit but was a little loose. Just looked up SAE to metric conversions and 3/8″ is 9.525mm so it looks like a 10mm hex head for the drain bolt.

I didn’t want to strip out the hex plug with the wrong sized socket so I packed it in for tonight. Tomorrow I’ll call the dealership get the fastener sizes. I was able to get a 17mm socket over the standard bolt head of the fill plug.